Skip to main content

Flash example (IAP example)

(C) COPYRIGHT 2015 WIZnet Co.,Ltd.

  • file : Flash/IAP_Example/readme.md
  • author : IOP Team
  • version : V1.0.0
  • date : 1-May-2015
  • brief : Description of IAP example.

THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, WIZNET SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.

Example Description​

This example shows how to use IAP of W7500.

In this example:

  • SET Start address of Data memory & flash memory
  • Data0 area Erase , Read and Write Test (Start address : 0x0003_FE00, Size : 256)
  • Data1 area Erase, Read and Write Test (Start address : 0x0003_FF00, Size : 256)
  • Code Flash Block Rease, Read and Write Test (Start address : 0x0001F000, Size : 4096)

Directory contents​

  • Flash/IAP_Example/main.c (Main program)
  • Flash/IAP_Example/W7500x_it.c (Interrupt Handlers)
  • Flash/IAP_Example/W7500x_it.h (Interrupt Handlers Header file)
  • Flash/IAP_Example/W7500x_conf.h (Library Configuration file)
  • Flash/IAP_Example/MDK/W7500x_IAP_Example.uvproj (MDK Project file)
  • Flash/IAP_Example/GCC/Makefile (GCC Make file)

Hardware and Software environment​

  • This example has been tested with WIZnet WIZwiki W7500 platform.

  • To select the WIZnet WIZwiki platform used to run the example.

  • WIZwiki W7500 Set-up

    • No need to hardware setup

How to use it ?​

In order to make the program work, you must do the following :

  • Open your preferred toolchain.
  • Rebuild all files and load your image into target memory.
  • Run the example.
  • WIZwiki W7500 where the Flash memory density ranges 128Kbytes.
  • If you have any questions, please use the forum site.

© COPYRIGHT 2015 WIZnet Co.,Ltd.