Skip to main content

Factory Reset Guide

Factory reset overview​

A factory reset will return the settings on the W55RP20-S2E to their factory state.

Required Hardware and Software​

Hardware​

  • W55RP20-S2E
  • Cables (Ethernet / Serial)

Software​

How to factory reset the W55RP20-S2E​

There are two ways to perform a W55RP20-S2E factory reset.

Using Config Tool​

Step 1: Run Config-tool​

Run installed 'Config-tool'

Step 2: Select ⑦Factory Rest from the top icon menu​

step 3: Do factory reset​

  • select Yes

Step 4: Done​

  • If the factory reset completed successfully, you'll see a completion notification.

Using factory reset pin​

Step 1: Pull low Factory Reset pin​

  • Press and hold the factory reset switch for 5 seconds with the W55RP20-S2E booting normally.
  • The RUN STATUS PIN, LINK_STATUS PIN, and TCP_STATUS PIN will toggle twice rapidly.

Step 2: Done​

  • Use Config-tool to verify that it initialized properly.