Skip to main content

Web Server Configuration Guide

W55RP20-S2E Web Server Configuration Overview​

This document is a web server configuration guide for the W55RP20-S2E, an industrial Ethernet to RS232 data conversion device.

Required Hardware and Software​

Hardware​

  • Web Server Config Supported Devices List
    • W232N
    • W55RP20-S2E
    • WIZ75xSR Series

How to Configure in W55RP20-S2E Web server​

Step 1: Setup the S2E to an IP in the same range as the PC​

After connecting the power and Ethernet cables to the W55RP20-S2E, run the Configuration Tool you downloaded from the 'Software' section above. Then, click the buttons in the order shown in the picture below to set the IP range to the same as the user's PC.



Step 2: Access the web server for configuration​

Using a web browser (e.g., Chrome), connect to the web server at port 50003 of the S2E module address you have configured.



|

Step 3: Exploring the Configuration Feature​

(1) Get W55RP20-S2E information

Figure: Click the "Get Settings" button to load the information from the W55RP20-S2E




(2) Description of Fields

Figure: Device Name Field


Figure: Network Information Field for W55RP20-S2E


Figure: Operation Mode and Port Field for W55RP20-S2E


Figure: UART Field for W55RP20-S2E




(3) Set W55RP20-S2E information

Figure: Click "Set Settings" and save the updated information for the W55RP20-S2E