Skip to main content

Kit parts datasheet

Kit Includes

           Part Name                         Description                       Q.Ty
WIZwiki-W7500 ARM Cortex-M0 Test Board 1
USB cable USB Mini-B, 1meter 1
LAN cable CAT5, 1meter 1
Breadboard 55 x 85 mm 2
Resistor (330 Ohm) 1/4W J(5%) 330 Ohm 20
Resistor (10K Ohm) 1/4W J(5%) 10K Ohm 20
Pushbutton Switch Momentary Pushbutton Switch 4
LED (Red) 5pi DIP type Red LED 5
LED (Green) 5pi DIP type Green LED 5
LED (Yellow) 5pi DIP type Yellow LED 5
LED (RGB) RED/GREEN/BLUE Triple Color LED 3
Rotary Potentiometer Rotary Potentiometer / 10K Ohm 1
Humidity & Temp Sensor DHT11 (Humidity & Temperature Sensor) 1
Temperature Sensor TMP36GT9 (Low Voltage Temperature Sensor) 1
Photo Resistor PGM5537D (CDS Photo Resistor) 1
Magnetic Buzzer SM-1205C (Magnetic Buzzer) 1
Jumper Wire (M/M) Various Colors, 26 AWG, 6" (15 cm) Jumper wires 40
Jumper Wire (M/F) Various Colors, 26 AWG, 8" (20 cm) Jumper wires 10

Datasheet

LED (RGB)

  • Common Anode type
  • There are three LEDs (RED, GREEN, BLUE) in a part.
  • There are 4 leads. Each LED has one negative lead, three LEDs has common positive lead.
  • Common Anode lead is the longest one among 4 leads. This lead should be connected to 3.3V.

DHT11 (Humidity & Temperature Sensor)


Temperature Sensor TMP36GT9 (Low Voltage Temperature Sensor)


Photo Resistor PGM5537D (CDS Photo Resistor)

  • A photoresistor or light-dependent resistor (LDR) or photocell is a light-controlled variable resistor.
  • The resistance of a photoresistor decreases with increasing incident light intensity; in other words, it exhibits photoconductivity.
  • A photoresistor can be applied in light-sensitive detector circuits, and light- and dark-activated switching circuits.
  • Datasheet: Download