Skip to main content

Download

WIZ5xxSR-RP Firmware Update Overview​

Memory Map​

  • Internal Flash
    • Main flash size: 2 Mbytes
 Top Flash Memory Address /-------------------------------------------\  0x10200000
                          |                                           |
                          |             Parameters (64KB)             |
                          |-------------------------------------------|  0x101F0000
                          |                                           |
                          |              Reserved (448KB)             |
                          |                                           |
                          |-------------------------------------------|  0x10180000
                          |                                           |
                          |                                           |
                          |        Firmware Binary Bank (512KB)       |
                          |                                           |
                          |                                           |
                          |-------------------------------------------|  0x10100000
                          |                                           |
                          |                                           |
                          |          Application Bank (512KB)         |
                          |                                           |
                          |                                           |
                          |-------------------------------------------|  0x10080000
                          |                                           |
      Page 1 (256KB)      |                                           |
                          |             Bootloader (512KB)            |
      Page 0 (256KB)      |                                           |
                          |                                           |
                          \-------------------------------------------/  0x100000000

Firmware Update Sequence​

Figure: Firmware Update Sequence

How to Upload or Update the Firmware of WIZ5xxSR-RP​

The WIZ5xxSR-RP provides one method of uploading or updating firmware.

That's the way over ethernet using the Configuration Tool.

Using the Configuration Tool​

Required Hardware and Software​

Hardware​

  • WIZ5xxSR-RP
  • WIZ5xxSR-RP Evaluation Board (WIZ510SR-RP can be used without WIZ5xxSR-RP Evaluation Board.)
  • 5V Power adapter
  • Cables (Ethernet / Serial)

Software​

How to Upload or Update the Firmware​

Step 1: Setup Environment to Use WIZ5xxSR-RP​

The process of setup environment to use the WIZ5xxSR-RP each product is available at the 'Getting Started' document below.

Step 2: Upload Firmware​

  1. Click the Firmware Upload button
Figure: Click Firmware Upload button
  1. Select the uploaded firmware

When selecting firmware, you must select .bin(*_linker.bin).

Firmware in a file format other than .bin cannot be uploaded or updated properly.

Figure: Select uploaded firmware
  1. Uploading the firmware
Figure: Uploading firmware

Step 3: Done​

Firmware upload or update completed!

WIZ5xxSR-RP is searched after about 5 seconds in the Configuration Tool after firmware upload or update completed.

Figure: Firmware upload or update complete

Using USB​

Required Hardware and Software​

Hardware​

Software​

Step 1: Connect the WIZ505SR-RP-EVB to the WIZ5xxSR-RP​

Flip the WIZ505SR-RP and directly connect its J2 header to the J6 header on the WIZ505SR-RP-EVB.
Similarly, for the WIZ500SR-RP, connect its J4 and J5 headers to the J1 and J2 headers on the WIZ505SR-RP-EVB.

Step 2: Connect WIZ505SR-RP-EVB and PC with USB cable​

Figure: USB connection

Step 3: Enter Boot mode​

While holding down the BOOTSEL (SW1) button on the EVB, press and release the RESET (SW5) button.
You can see Mass Storage Device named RPI-RP2.

Figure: RPI-RP2

Step 4: Flash WIZ5xxSR-RP Firmware​

WIZ5XXSR-RP
Drag and drop the Boot.uf2 file from the Bin_Files_VXXX folder onto the USB mass storage device.
Once it is complete, repeat Step 2 and then drag and drop the App_linker.uf2 file onto the newly appeared USB device.

Step 5: Done​

Firmware upload or update completed!

WIZ5XXSR-RP is searched after about 5 seconds in the Configuration Tool after firmware upload or update completed.

WIZ VSP​

  • WIZ VSP (WIZnet Virtual Serial COM port) is the software for those users who want to use the existing application programs based on serial communication.
  • WIZnet Virtual Serial Port: It can be used to change the device that is connected to the PC through the existing serial interface to control by the remote Ethernet network.
  • If you agree with the End User License Agreement for WIZVSP, you will be able to download the program and get a registration key. When registering the product with license agreement, the MAC address of the product in use and the Email address of the contact person are required.

Requirement​

  • The latest version supports up to Windows 10, and we recommend using Windows 7 or higher.
info
  • Environments under Windows 7 support only the old version, if necessary, contact the technical support team.
  • The current WIZVSP driver does not officially support the Windows 11 environment, so operation cannot be guaranteed and technical support is difficult.
    • To use in the Windows 11 environment, you must manually enable the port using the 'Scan for hardware changes' menu in Device Manager.

Go to WIZVSP end user license agreement page:
http://wizvsp.wiznet.io