W5300 TOE Shield

Key Features

• Supports STM32 Nucleo-144 boards
  • NUCLEO-F207ZG
  • NUCLEO-F429ZI
  • NUCLEO-F439ZI
  • NUCLEO-F722ZE
  • NUCLEO-F756ZG
  • NUCLEO-F767ZI
• Supports 16/8 bit data bus width
• Supports 8 independent sockets simultaneously
• Usable without H/W design for W5300, transformer & RJ-45
• Built-in 25 MHz crystal oscillator
• Arduino pin compatible

Description

The W5300 TOE Shield is a board that enables high-speed bus communication with the W5300 and ST's Cortex MCU. The W5300-TOE-Shield is a board that can be mounted on a Nucleo board. Individual actions cannot be performed without the Nucleo-144 board, and the NUCLEO-F207ZG, NUCLEO-F429ZI, NUCLEO-F439ZI, NUCLEO-F722ZE, NUCLEO-F756ZG and NUCLEO-F767ZI boards are currently supported. It also supports various shield boards compatible with Arduino pins. However, the pin-out has changed a little in the process of using the W5300, so please refer to the pin map below.

Download

Datasheet

W5300 ToE Shield-Datasheet V1.0

Schematic

Download

Pin-out

Download

• Arduino Shield
• STM32 Nucleo-144 board

Hardware

Download

• W5300 TOE Shield Schematic
• W5300 TOE Shield Part List

Firmware Example

• C/C++
  • [W5300-TOE-C](https://github.com/Wiznet/W5300 TOE C)
• Arduino
  • [W5300-TOE-Arduino](https://github.com/Wiznet/W5300 TOE Arduino)
• MicroPython
  • [W5300-TOE-MicroPython](https://github.com/Wiznet/W5300 TOE MicroPython)