Skip to main content

Factory Reset Guide-[EN]

Factory reset overview​

A factory reset will return the settings on the W232N to their factory state.

Required Hardware and Software​

Hardware​

  • W232N
  • 5~36V Power adapter
  • Cables (Ethernet / Serial)

Software​

How to factory reset the W232N​

There are two ways to perform a W232N factory reset.

Using Config Tool​

Step 1: Run Config-tool​

Run installed 'Config-tool'

Step 2: Select ⑦Factory Rest from the top icon menu​

step 3: Do factory reset​

  • select Yes

Step 4: Done​

  • If the factory reset completed successfully, you'll see a completion notification.

Using factory reset switch​

Step 1: Remove the top case​

  • Remove the bolts on either side of the device to remove the top case

Step 2: Click the Factory Reset switch​

  • Press and hold the factory reset switch for 5 seconds with the W232N booting normally.
  • The RUN, LINK, and TCP LEDs blink twice rapidly.

Step 3: Done​

  • Use Config-tool to verify that it initialized properly.