Skip to main content

W7100A

caution

The W7100A has been discontinued because the W7100A test platform is no longer available.

If there are any questions, please use our Forum or contact us.

Overview​

iMCU W7100A is the one-chip solution which integrates an 8051 compatible microcontroller, 64KB SRAM and hardwired TCP/IP Core for high performance and easy development. The TCP/IP core is a market-proven hardwired TCP/IP stack with an integrated Ethernet MAC & PHY. The Hardwired TCP/IP stack supports the TCP, UDP, IPv4, ICMP, ARP, IGMP and PPPoE which has been used in various applications for years.

Features​

  • Fully software compatible with industrial standard 8051
  • Pipelined architecture which enables execution of instructions 4~5 times faster than a standard 8051
  • 10BaseT/100BaseTX Ethernet PHY embedded
  • Power down mode supported for saving power consumption
  • Hardwired TCP/IP Protocols: TCP, UDP, ICMP, IPv4 ARP, IGMP, PPPoE, Ethernet
  • Auto Negotiation (Full-duplex and half duplex), Auto MDI/MDIX
  • ADSL connection with PPPoE Protocol with PAP/CHAP Authentication mode support
  • independent sockets which are running simultaneously
  • 32Kbytes Data buffer for the Network
  • Network status LED outputs (TX, RX, Full/Half duplex, Collision, Link, and Speed)
  • Not supports IP fragmentation (driver function)
  • 2 Data Pointers (DPTRs) for fast memory blocks processing
  • Advanced INC & DEC modes
  • Auto-switch of current DPTR
  • 64KBytes Data Memory (RAM)
  • 255Bytes data FLASH
  • 64KBytes Code Memory
  • 2KBytes Boot Code Memory
  • Up to 16M bytes of external (off-chip) data memory (100pin version)
  • Interrupt controller
  • 2 priority levels
  • 4 external interrupt sources
  • Watchdog interrupt
  • Four 8-bit I/O Ports
  • Three timers/counters
  • Full-duplex UART (max. 230kBaud)
  • Programmable Watchdog Timer
  • DoCD™ compatible debugger
  • High Product Endurance
  • Minimum 100,000 program/erase cycles (FLASH)
  • Minimum 10 years data retention

Block Diagram​

Download​

Documents​

Datasheet​

W7100A Datasheet V1.2.5

Last Update: 2016.08.25

Erratasheet​

W7100A Chip Erratasheet v1.1.0

Last Update: 2012.09.18

Limitation Note​

Limitation Note – ARP problem in the NLB environment

Last Update: 2018.03.12

Comparison Sheet​

Comparison Sheet of W7100 & W7100A

Differences between W7100A and W7100_v1.1

Application Note​

W7100A Application Note (Docs & Sample Codes)
  • TCP, UDP, DHCP, DNS_Client, DDNS, HTTP_Server, HTTP_Client, Telnet, Serial to Ethernet, IPRAW, MACRAW, UART, Timer, LCD, I2C, Code Flash Programming, Data Flash Programming, External Memory, WDTimer
  • KEIL uVision 3 and 4 IDE Project

Drivers​

W7100A Driver
  • W7100A/ W7100 Integrated Driver (updated on 2013.04.16)
  • Produced by KEIL uVision 4 IDE

Utilities​

WIZISP & Programming Guide
  • Last Update: 2012.11.26
  • Version : 2.1.