CLI Configuration Tool Tutorial #2
The latest version tool can be downloaded at WIZnet-S2E-Tool github page.
For the CLI, you can use the terminal program built in the windows.
Command prompt(cmd.exe) or windows powershell or ETC.
In this tutorial, will use command prompt.
You can go to the path where config tool is located after running cmd.exe, but if you go into the tool directory and run cmd, you can start from that path.
You can see available options and detail description as following command.
Channel #0 Options:
Channel #1 Options:
UART Command mode switch settings:
Configuration from File:
<About Channel #N Options>
1 Port S2E devices
Use Channel #0 Options only.
2 Port S2E devices
Use both Channel #0 Options & Channel #1 Options.
You can search for devices using the -s / --search option.
Search result printed as standard out, and the mac address of the searched devices is recorded in mac_list.txt file.
If new device is found, it is displayed as 'New Device', and this is determined by whether it is recorded in mac_list.txt.
If you search for the same device again, you can see that 'New device' is not displayed.