Skip to main content

File Options

CLI Configuration Tool Tutorial #5


1. Getfile option#

You can check configuration information of the device use --getfile option for CLI.

There are example files named cmd_oneport.txt and cmd_twoport.txt for using getfile option.

These files contain command list of each 1 port and 2 port devices. This command list is used to get each configuration info from the device.

Basic command format is as follows.

for single device,

python wizconfig.py -d 00:08:DC:XX:XX:XX --getfile [file_name]

for multi devices,

python wizconfig.py -a --getfile [file_name]

for detail description of command set, refer to WIZ750SR Command List.


Example 1: Get all info#

If you use the example file as it is, you can get all the information of the device. Since the WIZ750SR is a 1 port device, use cmd_oneport.txt.

Try to perform a device search first.

python wizconfig.py -s

You then use the getfile option to get information from a single device or multiple devices as follows.

  • Single device
python wizconfig.py -d 00:08:DC:53:AE:93 --getfile cmd_oneport.txt
  • Multi devices
python wizconfig.py -a --getfile cmd_oneport.txt


Example 2: Getting part info#

If you want to get only some necessary information, refer to cmd_oneport.txt and modify it or create a new file to include only necessary commands.

For example, if you want to get only the network configuration information, try as follows.

1) Make new command list

cmd_net.txt

OP
IM
LI
SM
GW
DS
LP
RH
RP

2) Get information

Use getfile option with new command list file.

  • Single device
python wizconfig.py -d 00:08:DC:53:AE:93 --getfile cmd_net.txt

  • Multi devices
python wizconfig.py -a --getfile cmd_net.txt

You can use this after customizing according to your purpose and situation.


2. Setfile option#

You can save the settings you want to keep to a file and set them with the --setfile option.
It can be used as the macro.

To use this option, you have to make command set. (command + parameter)

List up and write the command set info you want to set a file.

The basic command format is as follows.

for single device,

python wizconfig.py -d 00:08:DC:XX:XX:XX --setfile [file_name]

for multi devices,

python wizconfig.py -a --setfile [file_name]

Example 1: Setfile#

There is an example file in the project directory, 'set_cmd.txt'.

set_cmd.txt

IM0
LI192.168.0.25
SM255.255.255.0
GW192.168.0.1
LP5000
BR12

* From top to bottom: local IP, Subnet mask, Gateway, Local port, Baudrate and set as follows.

* Single device

python wizconfig.py -d 00:08:DC:53:AE:93 --setfile set_cmd.txt

* Check:

python wizconfig.py -d 00:08:DC:53:AE:93 --getfile set_cmd.txt

* Multi devices

python wizconfig.py -a --setfile set_cmd.txt

* Check:

python wizconfig.py -a --getfile set_cmd.txt

The setfile option can be useful when you want to save and use multiple options as shown above.