The 'Using the OpenSSL' section provides a guide to connecting to the SSL server through OpenSSL
WIZ510SSL-RS232/TTL-EVB Evaluation Board
Cables (Ethernet / Serial / Micro USB Type B)
WIZnet S2E Configuration Tool
The process of set up environment to use the WIZ510SS is available at the WIZ510SSL Getting Started page.
- Set up the SSL server
- Run the SSL server
- Select SSL TCP client mode in the Operation mode setting section
|Figure: Select SSL TCP client mode|
- Input the remote host IP (or URL) and remote port in the Remote host / port section
|Figure: Input the remote host IP and remote port|
- Click the Apply Settings button to save the settings
|Figure: Click the Apply Settings button|
| Figure: Saved settings
※ Note: If you need certificates to connect to SSL server, please refer to the 'Upload Certificates' section below.
WIZ510SSL is successfully connected to SSL server through OpenSSL!
|Figure: Connect to the SSL server|
You can upload certificates below in the 'Certificate manager' tab of the'WIZnet S2E Configuration Tool'.
- Root CA
- Client Certificate
- Private key
Upload and set up the certificates required by the SSL server you want to connect to.
After loading the certificate by clicking the 'Load file' button, be sure to save it by clicking the 'Save to device' button.
|Figure: Upload Certificates|