Skip to main content

Firmware Update Guide

Using the WIZnet S2E Configuration Tool#

The 'Using the WIZnet S2E Configuration Tool' section provides a firmware update guide through WIZnet S2E Configuration Tool.

Required Hardware and Software#

Hardware#

  • WIZ510SSL

  • WIZ510SSL-RS232/TTL-EVB Evaluation Board

  • Cables (Ethernet / Serial / Micro USB Type B)

Software#

How to Download the Firmware Using the WIZnet S2E Configuration Tool#

Step 1: Set up environment to use the WIZ510SSL#

The process of set up environment to use the WIZ510SS is available at the WIZ510SSL Getting Started page.

Step 2: Firmware Upload#

  • Click the firmware upload button
Figure: Click the firmware upload button
  • Select the downloaded firmware (*.bin)
    • When current flash bank 0 in the WIZnet S2E Configuration Tool, select firmware (.bin) for BANK 0
    • When current flash bank 1 in the WIZnet S2E Configuration Tool, select firmware (.bin) for BANK 1
Figure: Select the firmware
Figure: Firmware selection warning
  • Uploading firmware
Figure: Uploading firmware

Step 3: Done#

Firmware update is finished!

Figure: Finished firmware update